ETHERNET |
|
| WAN |
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u,
802.3az standards, supports auto MDI/MDIX crossover |
| LAN |
3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u,
802.3az standards, supports auto MDI/MDIX crossover |
| NETWORK |
|
| Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP),
Policy based routing |
| Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP,
SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT,
Wake On Lan (WOL) |
| VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP
packets |
| Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link
inspection |
| Firewall |
Port forward, traffic rules, custom rules |
| Firewall status page |
View all your Firewall statistics, rules, and rule counters |
| Ports management |
View device ports, enable and disable each of them, turn
auto-configuration on or off, change their transmission speed, and so on |
| Network topology |
Visual representation of your network, showing which devices are
connected to which other devices |
| Hotspot |
Captive portal (Hotspot), internal/external Radius server, SMS
authorization, internal/external landing page, walled garden, user scripts,
URL parameters, user groups, individual user or group limitations, user
management, 9 default customizable themes and option to upload and download
customised hotspot themes |
| DHCP |
Static and dynamic IP allocation, DHCP Relay |
| QoS / Smart Queue Management (SQM) |
Traffic priority queuing by source/destination, service, protocol or
port, WMM, 802.11e |
| DDNS |
Supported >25 service providers, others can be configured manually |
| Network backup |
VRRP, Wired options, each of which can be used as an automatic Failover |
| Load balancing |
Balance Internet traffic over multiple WAN connections |
| SSHFS |
Possibility to mount remote file system via SSH protocol |
| SECURITY |
|
| Authentication |
Pre-shared key, digital certificates, X.509 certificates, TACACS+,
Radius, IP & Login attempts block |
| Firewall |
Pre-configured firewall rules can be enabled via WebUI, unlimited
firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS
attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL
flags, FIN scan attacks) |
| VLAN |
Port and tag-based VLAN separation |
| WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying
allowed sites only |
| Access control |
Flexible access control of SSH, Web interface, CLI and Telnet |
| VPN |
Multiple clients and a server can run simultaneously, 27 encryption
methods |
| OpenVPN |
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, |
| OpenVPN Encryption |
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128,
AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128,
AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192,
AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256,
AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256,
AES-256-CBC 256 |
| IPsec |
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128,
AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12,
AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) |
| GRE |
GRE tunnel, GRE tunnel over IPsec support |
| PPTP, L2TP |
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec
support |
| Stunnel |
Proxy designed to add TLS encryption functionality to existing clients
and servers without any changes in the program’s code |
| DMVPN |
Method of building scalable IPsec VPNs |
| SSTP |
SSTP client instance support |
| ZeroTier |
ZeroTier VPN client support |
| WireGuard |
WireGuard VPN client and server support |
| Tinc |
Tinc offers encryption, authentication and compression in it's tunnels.
Client and server support. |
| Tailscale |
Tailscale offers speed, stability, and simplicity over traditional VPNs.
Encrypted point-to-point connections using the open source WireGuard protocol |
| OPC UA |
Client, Server |
| Supported modes |
TCP |
| Supported connection types |
|
MODBUS TCP SLAVE |
|
| ID range |
Respond to one ID in range [1;255] or any |
| Allow Remote Access |
Allow access through WAN |
| Custom registers |
MODBUS TCP custom register block requests, which read/write to a file
inside the router, and can be used to extend MODBUS TCP Slave functionality |
| MODBUS TCP MASTER |
|
| Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats |
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float,
INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| DATA TO SERVER |
|
| Protocol |
HTTP(S), MQTT, Azure MQTT, Kinesis |
| Data to server |
Extract parameters from multiple sources and different protocols, and
send them all to a single server |
| MQTT GATEWAY |
Allows sending commands and receiving data from MODBUS Server through
MQTT broker |
| MQTT Gateway |
|
| DNP3 |
|
| Supported modes |
TCP Master, DNP3 Outstation |
| DLMS |
DLMS - standard protocol for utility meter data exchange |
| DLMS Support |
|
API |
|
| Teltonika Networks Web API (beta) support |
Expand your device's possibilities by using a set of configurable API
endpoints to retrieve or change data. For more information, please refer to
this documentation: https://developers.teltonika-networks.com |
| MONITORING & MANAGEMENT |
|
| WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event
log, system log, kernel log |
| FOTA |
Firmware update from server, automatic notification |
| SSH |
SSH (v1, v2) |
| TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP,
Friendly tech, AVSystem |
| MQTT |
MQTT Broker, MQTT publisher |
| SNMP |
SNMP (v1, v2, v3), SNMP Trap |
| JSON-RPC |
Management API over HTTP/HTTPS |
| RMS |
Teltonika Remote Management System (RMS) |
IOT PLATFORMS |
|
| Allows monitoring of: Device data, Mobile
data, Network info, Availability |
Cloud of Things |
| ThingWorx |
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type
and IP |
| Cumulocity |
Can send device IP, Number of bytes send/received, Temperature, PIN count
to Azure IoT Hub server |
| Azure IoT Hub |
|
| SYSTEM CHARACTERISTICS |
Quad-core ARM Cortex A7, 717 MHz |
| CPU |
256 MB, DDR3 |
| RAM |
256 MB, SPI Flash |
| FLASH storage |
|
| FIRMWARE / CONFIGURATION |
Update FW from file, check FW on server, configuration profiles,
configuration backup |
| WEB UI |
|
| FOTA |
Update FW |
| RMS |
Update FW/configuration for multiple devices at once |
| Keep settings |
Update FW without losing current configuration |
| FIRMWARE CUSTOMISATION |
RutOS (OpenWrt based Linux OS) |
| Operating system |
Busybox shell, Lua, C, C++ |
| Supported languages |
SDK package with build environment provided |
| Development tools |
You can create your own custom, branded firmware and web page application
by changing colours, logos, and other elements in our firmware to fit your or
your clients’ needs. |
| GPL customization |
|
| USB |
USB 2.0 |
| Data rate |
Samba share, USB-to-serial |
| Applications |
Possibility to connect external HDD, flash drive, additional modem,
printer, USB-serial adapter |
| External devices |
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
| Storage formats |
|
INPUT / OUTPUT |
|
| Input |
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as
logic high |
| Output |
1 x Digital Output, Open collector output, max output 30 V, 300 mA |
| Events |
Email, RMS |
| I/O juggler |
Allows to set certain I/O conditions to initiate event |
| POWER |
|
| Connector |
4-pin industrial DC power socket |
| Input voltage range |
9 - 50 VDC, reverse polarity protection, voltage surge/transient
protection |
| PoE (passive) |
Possibility to power up through LAN1 port, not compatible with
IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC |
| Power consumption |
6 W Max |
| PHYSICAL INTERFACES |
|
| Ethernet |
4 x RJ45 ports, 10/100/1000 Mbps |
| I/O’s |
1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| Status LEDs |
8 x LAN status LEDs, 1 x Power LED |
| Power |
1 x 4-pin power connector |
| USB |
1 x USB A port for external devices |
| Reset |
Reboot/User default reset/Factory reset button |
| Other |
1 x Grounding screw |
PHYSICAL SPECIFICATION |
|
| Casing material |
Aluminium housing |
| Dimensions (W x H x D) |
115 x 32.2 x 95.2 mm |
| Weight |
345 g |
| Mounting options |
DIN rail, flat surface placement |
| OPERATING ENVIRONMENT |
|
| Operating temperature |
-40 °C to 75 °C |
| Operating humidity |
10% to 90% non-condensing |
| Ingress Protection Rating |
IP30 |
| REGULATORY & TYPE APPROVALS |
CE, UKCA, EAC, UCRF, CITC, ANRT, NOM, UL/CSA Safety, CB |
| Regulatory |
|
EMC EMISSIONS & IMMUNITY |
|
| Standards |
EN 55032:2015, EN 55035:2017 |
| ESD |
EN 61000-4-2:2009 |
| Radiated Immunity |
EN IEC 61000-4-3:2006 + A1:2008 + A2:2010 |
| EFT |
EN 61000-4-4:2012 |
| Surge Immunity (AC Mains Power Port) |
EN 61000-4-5:2014 |
| Surge immunity (AC Power Line) |
EN 61000-4-5:2014 |
| CS |
EN 61000-4-6:2014 |
| DIP |
EN 61000-4-11:2004 |
SAFETY |
|
Standards
|
CE: EN 62368-1:2014 + A11:2017, EN 62311:2008 |
Standards
| CB: IEC 62368-1:2018 |
Standards
| RCM: AS/NZS 62368.1:2018
|
Standards
| RCM: AS/NZS 62368.1:2018
|
